The analog front panel header design lets intergrators place audio functionality on the front panel of a PC system via a cabled up front panel dongle. This content describes the header pinout configuration for connecting chassis to Striker 7.1 audio cables up.

Connect Front Panel dongle of PC case after installation of STRIKER7.1.

Pin configuration.

• Pin 1 - MIC
• Pin 2 - Ground
• Pin 3 - Bias (MIC Power)
• Pin 5 - Front Right
• Pin 9 - Front Left
• Pin 4,6,7,8 and10 are not applicable

And you can use Front Panel Audio connector of your PC case from your nice STRIKER7.1 sound card.

Note: Striker7.1 Front Panel Audio is Intel Standard Front Audio. It does not fit for Dell Front Panel Audio connector.

 Back to FAQ page >>